Leadleds Bus Destination Sign Board Programmable Message Control

Von einem Mystery-Man-Autor

Last updated 17 mai 2024

Leadleds Bus Destination Sign Board Programmable Message Control

Scrolling Led signs with LCD message controller, the highly attractive bus-led signs which in front of a bus to display the route and stop information, RS232 or LAN to update message, by the LCD controller to select your customized messages, very convenient to use.
The most popular bus led signs which in front of a bus to display the route and stop information, LAN to update messages, by the LCD controller to select your customized messages.Item No.: LLDP475-LCD16128RDot-matrix: 16x128Pitch: 4.75mmDisplay space: 608 X76mm( L24" X H3.2")Led Car Sign Frame Dimensions: 25.2 x 4.3 x 2.2 inchesInput voltage: DC12V-36VEnclosure: Black aluminum alloy frameInstallation Method: by screws and hooksDisplay Color: RedCommunicate way: LANNonwaterproofHigh-quality bus led sign, shockproof design, over-current protection, over-voltage protection, under-voltage protection, and short-circuit protection.LCD Keypad functions introduction.1. Directional and numeric keys2. Brightness setting3. Power-off saving4. Language setting5. Buzzer setting6. Baud rate setting and synchronization function setting1. Direction key:Click UP Switch the program up, and Click DOWN Switch down the program.Numerical key:Click 5 + OK Select Play program 5, Click 5+6 + OK, and select Play program 56.2. Brightness Settings:Click FN Enter the function Settings interface, Select the brightness setting option, Click OK Go to the Brightness Adjustment page, Click again UP, and DOWN Increase or decrease brightness.Or click 6 +OK Adjust to Brightness 6. Click FN Return to the previous interface.3. Switch screen:Select the Go to Switch Screen option, Click OK Click UP, and DOWN Switch on and off screen options. Click FN Return to the previous interface.4. Save without powerWhen the led sign is turned on and powered back on, the selected program will be maintained.5. Language Settings：Support Chinese, English, and traditional three languages, Select the language settings and click OK to enter, Click UP and DOWN to Switch languages, and Click OK to Select the language. Then wait to power up again.6. Buzzer SettingsThere will be a dripping sound every time the button is turned on, and there will be no after it is turned off.7. Baud rate settingSwitch to the baud rate setting option. Click OK, Click again UP and DOWN Switching baud rate, Last click OK.8. Setting of the synchronization functionDivided into screen capture synchronization and text synchronization, the text program will display the current program, and the screen capture function will intercept the picture to the keypad. (The size cannot exceed 128x64 points and there is no grayscale.)9. Edit the program sequence function ：Click the number keys 1+ADD +3 +ADD +5 + OKProgram 1, program 3, and program 5 are played in sequence.Click the number keys 5+ADD +1 + ADD+ 3+ OKProgram 5, program 1, and program 3 are played in sequence.