Power over Ethernet (PoE) Injector

Reduce costs by using existing Cat5 cable to provide both power and dataThe Power over Ethernet Injector from Intellinet Network Solutions allows you

Generic PoE-48005 48V 0.5A POE Injector Power Over Ethernet

PoE Texas POE-12-24v60w | 12 Port Passive PoE Injector - Power Over Ethernet with 24 Volt 60 Watt Power Supply for Ubiquiti, Mikrotik and Similar

How PoE Injector Works with Splitter for Power over Ethernet? - FASTCABLING

12V 2A 24W PoE Injector Power Over Ethernet Adapter for 802.3af IP Phone WLAN AP

L-com's POE10GAT PoE+ midspan injector is IEEE 802.at certified and is here to meet all your Ethernet power needs. Its single port shielded design can

PoE+ Midspan Injector, 1 Port Power Over Ethernet, 10 Gbps, CAT 6a or 7, UL, 802.3at Certified, 53 Volts at 32 Watts Power Supply

Remote power up to 2 10/100Mbps Access points, phones or cameras Thru CAT.5,6,7 Cable up to 328.1 feet(100 meters) Powers 802.3af devices up to 24

PLUSPOE 48 Volt Power Over Ethernet PoE Injector Adapter with 2-Ports PoE Out Max 48 watts for 2 IP Cameras, VOIP Phones or Access Points and Other

Build-in detection chip inside,which will detect and classify PD before powering it(Active PoE),Protection of non-standard devices UL SAA PSE BIS CE

Procet Single Port Gigabit Power Over Ethernet Active PoE Injector 60W POE Midspan 55V, IEEE802.3af,IEEE802.3at,PoE++, for IP Camera , Access Point

GAT-8 IEEE 802.3at Active Gigabit PoE+ Injector Power Over Ethernet In – poe -world

Gigabit Power over Ethernet (PoE) Injector - TRENDnet TPE-111GI

The TP-POE-48G, PoE Power Source offered by Tycon Power is a quality midspan power source for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the R model the voltage is reversed. 4,5(V-) and 7,8(V+).

Tycon Systems TP-POE-48G 120/240VAC, 48V 24W GigE Pasv PoE Ins

Get power and data over your existing LAN cable. The Intellinet Network Solutions Industrial Gigabit High-Power connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

Intellinet 561365 Industrial Gigabit High-Power PoE+ Injector